Cosben

Products

General Purpose Bucket (ST)
The most widely used and versatile bucket, available in different widths depending on the machine capacity. The base blade and side cutters are in wear-resistant steel, ensuring the necessary toughness for all routine work. The bucket adapts to different applications, from ditch and trench digging to moving material of light to medium consistency.

Stone Bucket (RC)
Made entirely in extremely high resistance steel and further reinforced in the areas most subject to loading, the Stone Bucket is designed for very hard ground (e.g. stone quarries), excavating rocky and highly abrasive terrain, and any other applications that require extreme wear resistance.

Hydraulic Expulsion Bucket (ES)
This is the most widely used and versatile among the very narrow tipping buckets. Its hydraulic expulsion device provides quick, complete emptying. Recommended for cohesive and clayey terrain that typically stick to the bucket making removal difficult.

SKELETON bucket (GR)
A special mesh structure bucket made entirely in Hardox 400 (high quality wear-resistant steel). It is ideal for selecting stony materials and separating coarse materials from fine, for example gravel from sand on demolition sites.

Trapezoid bucket (TR)
Essential for the longitudinal digging of channels. It has a set bottom width with side blades that extend outside the bucket itself. The sides are angled to create precisely profiled banks in a single operation. The bucket side angle can be varied on request.

Ditch Bucket (PS)
This bucket has a very wide base with lateral draining holes. It is ideal for maintaining, forming, and cleaning channels and water courses an for smoothing banks. It is also suitable for loading, leveling, and filling with loose materials.

Swivel bucket (OR)
Like the Ditch Bucket it has a very wide base and is suitable for maintaining channels, and smoothing slopes and faces to a precise profile. However, because of its enormous versatility (swiveling 45º to both sides of the arm axis), it can operate in difficult circumstances, regardless of the machine support base.

Scarp Bucket (SC)
Made entirely in high performance abrasion-resistant steel (Hardox 400), it is clearly suited to moving and loading masses, boulders, blocks of marble, etc., of significant size. Its unusual elongated shape and toughness ensure maximum support and deep penetration on any type of ground. Available with or without replaceable teeth.

Heavy duty Bucket (HD)
Versatile and available in different lengths, it differs from the Standard Bucket in the use of extremely tough steel (400 BHN), and is further reinforced at the points most subject to wear. The Heavy Duty Bucket has innumerable applications, from ditch and trench digging even on partially rocky terrain, to the movement of substantial masses

Ripper Bucket (BR)
With its special shape, the Ripper Bucket is ideal for working on very hard terrain. The phased alignment of the teeth concentrates the force initially on the central tooth and then on the two lateral ones, increasing penetration even in extreme conditions.

Ripper Tooth (RI)
The Ripper Tooth increases tearing capacity for diggers working on rocky or icy terrain during the extraction of heavy masses etc. Without the Ripper Tooth the machine and bucket could be subject to excessive forces. It is made entirely in abrasion-resistant steel and built for tough working conditions.

Heavy Duty Multifunction 4 in 1 Bucket (BD)
This hydraulic 4 in 1 bucket offers increased functionality compared with the Standard Bucket. It can hook, smooth, dig and back-load and is entirely made in wear-resistant steel (min. 400 BHN). Its shape ensures high penetration even in difficult conditions. It has two well-protected cylinders incorporated into the bucket that drive the opening and closing action.